Jual Alat Ukur Ketebalan Material PCE-TG 300

Deskripsi :

The PCE-TG 300 is a wall thickness meter with special sensors for various applications. In general, the wall thicknesses of all homogeneous materials can be measured with the PCE-TG 300. For damping or scattering materials such as plastic or cast a special sensor is available. An angled 90° sensor also enables measurements at hard-to-reach measuring points. The speed of sound can be set freely on the wall thickness meter PCE-TG 300 and thus adapted to a wide variety of materials.

The measured values ​​are displayed directly on the easy-to-read TFT color display. Due to the internal memory, which can be read out via the optionally available software, different measuring points can be clearly stored. The non-destructive ultrasound measuring method enables the measurement even on end products. Thanks to the Echo-Echo working mode, even coated workpieces can be measured.

- Large measuring range
- Various sensors available
- Battery operation
- Error and voids detection
- Internal measurement data memory
- Print via Bluetooth

                                          Jual Alat Ukur Ketebalan Material PCE-TG 300

Spesifikasi :

Measuring rangePE: pulse-echo mode 0.65 ... 600 mm (steel)
 EE: echo-echo mode 2.50 ... 60 mm
Accuracy± 0.04 mm H [mm] (<10 mm); ± 0.4% H [mm] (> 10 mm)
 H refers to the material thickness of the workpiece
Resolution0.1 mm / 0.01 mm / 0.001 mm (adjustable)
  
Measurable materialsMetals
 Plastics
 Ceramics
 Epoxy resin
 Glass
 And all homogeneous materials
  
Working modesPulse echo mode (fault and blower detection)
 Echo-Echo mode (hiding layer thicknesses, eg paints)
  
CalibrationSound velocity calibration
 Zeroing
 Two-point calibration
  
View modeNormal mode, Scan mode, Difference mode
Unitsmm / inch
Data transferPrint via Bluetooth / USB 2.0
StorageNon-volatile memory with 100 data groups with 100 data sets each
Operating timeContinuous operation 100 h
 Automatic stand-by mode (adjustable)
 Automatic switch-off mode (adjustable)
  
Power supply4 x AA battery 1.5V
Display320 x 240 pixels TFT LCD color display with brightness adjustment
Operating conditions0 ... 50°C / 32 ... 122°F, ≤ 80% RH not condensing
Storage conditions-20 ... 70°C / -4 ... 158°F, ≤ 80% rh non-condensing
Dimensions185 x 97 x 40 mm / 7.3 x 3.8 x 1.6 in
Weight375 g / < 1 lb

 

Share this

Related Posts

Latest
Previous
Next Post »