Jual Alat Uji UTM 300 KN WDW-300 & WDW-300E

1 Adopt floor structure, High Stiffness, lower for tensile, upper for compressionupper for tensile, lower for compression, double space. The beam is step less lifting.
2 Adopting ball screw drive, realize no clearance transmission,make sure the precision control
of the test force and deformation speed.
3 The shiel plate with limit mechanism used to control the beam moving range, in order to avoid sensor damaged due to the moving distance is too large.
4 The table, moving beams is made of high quality precision machining steel plate not
only reduce the vibration generated by specimen fracture, but also improve the stiffness.
5 Three columns of mandatory orientation, make the main unit rigidity much improved, to
further ensure the repeatability of measurement.
6 Adopt bolt type grip installation, make the grip replace easier.
7 Adopt AC servo driver and AC servo motor, with stable performance,more reliable. Have over-current, over-voltage, over speed, overload protection device.

Jual Alat Uji UTM WDW-300 & WDW-300E

It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.

ASTM, ISO, DIN, GB and other international standards.


Max. Load
300 KN

Four-column Floor Model (Upper Is Compression And Lower Is Tensile)

Control Method
Computer Automatic Control

Load Accuracy
1 Class
0.5 Class

Load Range
2%~100% FS (6KN~300KN)
0.2%~100% FS (0.60KN~300KN)

Taiwan TECO AC Servo Motor
Panasonic Motor, Made In Japan

High Precision Load Sensor, Made In China
Import Sensor, Made In USA


Measuring Range of Deformation

Accuracy Indication of Deformation

Disp. Indicating Relative Error

Displacement Resolution

Adjusting Range of Control Rate of Load

Control Precision of Control Rate of Load
When rate < 0.05% FS/s, the precision is within ± 2% of setting value; When rate ≥ 0.005%FS/s, the precision is within ± 1% of setting value.

Adjustment Scope of Deformation Rate

Accuracy of Deformation Rate
Test Speed<0.05%FN/s, within the ±2% of the preset value, Test Speed≥0.05%FN/s, within the ±0.5% of the preset value.

Adjusting Range of Displacement Rate
0.05~1000mm/min (Can be customized)

Control Precision of Displacement Rate
When rate < 0.5mm/min, within ± 1% of setting value; When rate ≥ 0.5mm/min, within ± 0.5% of setting value.

Scope of The Consistent Load Deformation and Displacement Control

Accuracy of The Consistent Load Deformation and Displacement Control
Preset value≥10%FN, within the ±0.1% of preset value; Preset value<10%FN, within the ±1% of preset value.

Tensile Space
550mm (Can be customized)

Compression Space
550mm (Can be customized)

Effective Spacing
600mm (Can be customized)

Load Cell Configuration
One PC (Max Load). More load cells can be added according to customer requirement.

Extend Configuration
Large deformation extensometer, High or low temperature test chamber, High temperature oven.

Power Supply
AC 220V±10%, 50Hz (Can be customized)

Optional: Hydraulic Automatic Grip


1800 KG

Artikel Terkait : Mesin UTM Untuk Komposit
Artikel Terkait : Alat Uji Tarik Kabel Baja
Artikel Terkait : Mesin Uji Tekan
Artikel Terkait : Alat Uji Tarik Kawat Kabel

Share this

Related Posts

Next Post »