Alat Uji UTM 100 KN WDS-100


1. Adopt floor structure, High Stiffness, lower for tensile, upper for compression, upper for tensile, lower for compression, double space. The beam is step less lifting.

2.  Adopting ball screw drive, realize no clearance transmission,make sure the precision control of the test force and deformation speed.

3.  The shiel plate with limit mechanism used to control the beam moving range, in order to avoid sensor damaged due to the moving distance is too large.

4.  The table, moving beams is made of high quality precision machining steel plate not only reduce the vibration generated by specimen fracture, but also improve the stiffness.

5. Three columns of mandatory orientation, make the main unit rigidity much improved, to further ensure the repeatability of measurement.

6.    Adopt bolt type grip installation, make the grip replace easier.

7.  Adopt AC servo driver and AC servo motor, with stable performance,more reliable. Have over-current, over-voltage, over speed, overload protection device.

Alat Uji UTM 100 KN WDS-100

It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.

ASTM, ISO, DIN, GB and other international standards.




Max. Load

100 KN


Four-column Floor Model (Upper Is Compression and Lower Is Tensile OR Upper Is Tensile And Lower Is Compression)

Control Method

Single Chip Control

Load Accuracy

1 Class

Load Range

2%~100%F·S (2KN~100KN)

Displacement Resolution


Test Speed


Tensile Space

700mm (Can be customized)

Compression Space

700mm (Can be customized)

Test Width

550mm (Can be customized)

Power Supply

AC220V±10%, 50Hz (Can be customized)


Wedge Type, Plate Type and Other Grips As Customers’Demand


800 KG




Share this

Related Posts

Next Post »