Alat Uji Tarik Kawat Kabel WDW-600 & WDW-600E

Feature:

1 Adopt floor structure, High Stiffness, lower for tensile, upper for compressionupper for tensile, lower for compression, double space. The beam is step less lifting.

2 Adopting ball screw drive, realize no clearance transmission,make sure the precision control

of the test force and deformation speed.

3 The shiel plate with limit mechanism used to control the beam moving range, in order to avoid sensor damaged due to the moving distance is too large.

4 The table, moving beams is made of high quality precision machining steel plate not

only reduce the vibration generated by specimen fracture, but also improve the stiffness.
5 Three columns of mandatory orientation, make the main unit rigidity much improved, to

further ensure the repeatability of measurement.

6 Adopt bolt type grip installation, make the grip replace easier.

7 Adopt AC servo driver and AC servo motor, with stable performance,more reliable. Have over-current, over-voltage, over speed, overload protection device.

Alat Uji Tarik Kawat Kabel WDW-600 & WDW-600E

Application:
It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.

Standard: 
ASTM, ISO, DIN, GB and other international standards.

Spesikasi

Model

WDW-600

WDW-600E


Max. Load

600 KN


Structure

Four-column Floor Model (Upper Is Compression And Lower Is Tensile)



Control Method

Computer Automatic Control


Load Accuracy

1 Class

0.5 Class


Load Range

2%~100% FS (12KN~600KN)

0.2%~100% FS (1.20KN~600KN)


Motor

Taiwan TECO AC Servo Motor

Panasonic Motor, Made In Japan


Sensor

High Precision Load Sensor, Made In China

Import Sensor, Made In USA


Resolution

1/300000


Measuring Range of Deformation

2%~100%


Accuracy Indication of Deformation

≤±0.5%


Disp. Indicating Relative Error

≤±1%


Displacement Resolution

0.04um


Adjusting Range of Control Rate of Load

0.005~5%FS/S


Control Precision of Control Rate of Load

When rate < 0.05% FS/s, the precision is within ± 2% of setting value; When rate ≥ 0.005%FS/s, the precision is within ± 1% of setting value.



Adjustment Scope of Deformation Rate

0.005~5%FN/S


Accuracy of Deformation Rate

Test Speed<0.05%FN/s, within the ±2% of the preset value, Test Speed≥0.05%FN/s, within the ±0.5% of the preset value.



Adjusting Range of Displacement Rate

0.05~200mm/min (Can be customized)


Control Precision of Displacement Rate

When rate < 0.5mm/min, within ± 1% of setting value; When rate ≥ 0.5mm/min, within ± 0.5% of setting value.



Scope of The Consistent Load Deformation and Displacement Control

0.5%~100%FS


Accuracy of The Consistent Load Deformation and Displacement Control

Preset value≥10%FN, within the ±0.1% of preset value; Preset value<10%FN, within the ±1% of preset value.



Tensile Space

700mm (Can be customized)


Compression Space

700mm (Can be customized)


Effective Spacing

650mm (Can be customized)


Load Cell Configuration

One PC (Max Load). More load cells can be added according to customer requirement.



Extend Configuration

Large deformation extensometer, High or low temperature test chamber, High temperature oven.



Power Supply

AC 220V±10%, 50Hz (Can be customized)


Grips

Hydraulic Automatic Grip


Dimension

1360*1000*2830mm


Weight

3100 KG


 

Artikel Terkait : Mesin UTM Untuk Komposit

Artikel Terkait : Alat Uji Tarik Kabel Baja

Artikel Terkait : Alat Uji UTM 300 KN

Artikel Terkait : Mesin Uji Tekan 200 KN

 

Share this

Related Posts

Previous
Next Post »