Jual Mesin UTM Untuk Komposit WDW-100 & WDW-100E


1 Adopt floor structure, High Stiffness, lower for tensile, upper for compressionupper for tensile, lower for compression, double space. The beam is step less lifting.

2 Adopting ball screw drive, realize no clearance transmission,make sure the precision control

of the test force and deformation speed.

3 The shiel plate with limit mechanism used to control the beam moving range, in order to avoid sensor damaged due to the moving distance is too large.

4 The table, moving beams is made of high quality precision machining steel plate not

only reduce the vibration generated by specimen fracture, but also improve the stiffness.
5 Three columns of mandatory orientation, make the main unit rigidity much improved, to

further ensure the repeatability of measurement.

6 Adopt bolt type grip installation, make the grip replace easier.

7 Adopt AC servo driver and AC servo motor, with stable performance,more reliable. Have over-current, over-voltage, over speed, overload protection device.


Jual Mesin UTM Untuk Komposit WDW-100 & WDW-100E

It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.

ASTM, ISO, DIN, GB and other international standards.






Max. Load

100 KN


Four-column Floor Model (Upper Is Compression And Lower Is Tensile)

Control Method

Computer Automatic Control

Load Accuracy

1 Class

0.5 Class

Load Range

2%~100% FS (2KN~100KN)

0.2%~100% FS (0.20KN~100KN)


Taiwan TECO AC Servo Motor

Panasonic Motor, Made In Japan


High Precision Load Sensor, Made In China

Import Sensor, Made In USA



Measuring Range of Deformation


Accuracy Indication of Deformation


Disp. Indicating Relative Error


Displacement Resolution


Adjusting Range of Control Rate of Load


Control Precision of Control Rate of Load

When rate < 0.05% FS/s, the precision is within ± 2% of setting value; When rate ≥ 0.005%FS/s, the precision is within ± 1% of setting value.

Adjustment Scope of Deformation Rate


Accuracy of Deformation Rate

Test Speed<0.05%FN/s, within the ±2% of the preset value, Test Speed≥0.05%FN/s, within the ±0.5% of the preset value.

Adjusting Range of Displacement Rate

0.05~500mm/min (Can be customized)

Control Precision of Displacement Rate

When rate < 0.5mm/min, within ± 1% of setting value; When rate ≥ 0.5mm/min, within ± 0.5% of setting value.

Scope of The Consistent Load Deformation and Displacement Control


Accuracy of The Consistent Load Deformation and Displacement Control

Preset value≥10%FN, within the ±0.1% of preset value; Preset value<10%FN, within the ±1% of preset value.

Tensile Space

700mm (Can be customized)

Compression Space

700mm (Can be customized)

Effective Spacing

550mm (Can be customized)

Load Cell Configuration

One PC (Max Load). More load cells can be added according to customer requirement.

Extend Configuration

Large deformation extensometer, High or low temperature test chamber, High temperature oven.

Power Supply

AC 220V±10%, 50Hz (Can be customized)


Manual Grip/ (Optional : Hydraulic Automatic Grip)




850 KG

Artikel Terkait : Alat Uji Tarik Kabel Baja
Artikel Terkait : Alat Uji UTM 300 KN 

Artikel Terkait : Mesin Uji Tekan 200 KN
Artikel Terkait : Alat Uji Tarik Kabel Kawat

Share this

Related Posts

Next Post »