Jual UTM Untuk Plastik WDW-3 & WDW-3E


Feature:
1 Adopt floor structure, High Stiffness, lower for tensile, upper for compressionupper for tensile, lower for compression, double space. The beam is step less lifting.
2 Adopting ball screw drive, realize no clearance transmission,make sure the precision control
of the test force and deformation speed.
3 The shiel plate with limit mechanism used to control the beam moving range, in order to avoid sensor damaged due to the moving distance is too large.
4 The table, moving beams is made of high quality precision machining steel plate not
only reduce the vibration generated by specimen fracture, but also improve the stiffness.
5 Three columns of mandatory orientation, make the main unit rigidity much improved, to
further ensure the repeatability of measurement.
6 Adopt bolt type grip installation, make the grip replace easier.
7 Adopt AC servo driver and AC servo motor, with stable performance,more reliable. Have over-current, over-voltage, over speed, overload protection device.

Jual UTM untuk Plastik WDW-3 & WDW-3E

Application:
It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.

Standard:
ASTM, ISO, DIN, GB and other international standards.

Spesikasi
Model
WDW-3
WDW-3E


Max. Load
3 KN


Structure
Four-column Floor Model (Upper Is Compression and Lower Is Tensile OR Upper Is Tensile and Lower Is Compression)




Control Method
Computer Automatic Control


Load Accuracy
1 Class
0.5 Class


Load Range
2%~100% FS (0.06KN~3KN)
0.2%~100% FS (0.006KN~3KN)


Motor
Taiwan TECO AC Servo Motor
Panasonic Motor, Made In Japan


Sensor
High Precision Load Sensor,Made In China
Import Sensor, Made In USA


Resolution
1/300000


Measuring Range of Deformation
2%~100%


Accuracy Indication of Deformation
≤±1%


Disp. Indicating Relative Error
≤±1%


Displacement Resolution
0.04um


Adjusting Range of Control Rate of Load
0.005~5%FS/S


Control Precision of Control Rate of Load
When rate < 0.05% FS/s, the precision is within ± 2% of setting value; When rate ≥ 0.005%FS/s, the precision is within ± 1% of setting value.




Adjustment Scope of Deformation Rate
0.005~5%FN/S


Accuracy of Deformation Rate
Test Speed<0.05%FN/s, within the ±2% of the preset value, Test Speed≥0.05%FN/s, within the ±0.5% of the preset value.




Adjusting Range of Displacement Rate
0.05~1000mm/min (Can be customized)


Control Precision of Displacement Rate
When rate < 0.5mm/min, within ± 1% of setting value; When rate ≥ 0.5mm/min, within ± 0.5% of setting value.




Scope of The Consistent Load Deformation and Displacement Control
0.5%~100%FS


Accuracy of The Consistent Load Deformation and Displacement Control
Preset value≥10%FN, within the ±0.1% of preset value; Preset value<10%FN, within the ±1% of preset value.




Tensile Space
800mm (Can be customized)


Compression Space
800mm (Can be customized)


Effective Spacing
400mm (Can be customized)


Load Cell Configuration
One PC (Max Load). More load cells can be added according to customer requirement.




Extend Configuration
Large deformation extensometer, High or low temperature test chamber, High temperature oven.




Power Supply
AC 220V±10%, 50Hz (Can be customized)


Grips
Wedge Type, Plate Type and Other Grips as Customers’ Demand


Dimension
740*420*1720mm


Weight
160 KG



Jual UTM Untuk Karet WDW-2 & WDW-2E


Feature:
1 Adopt floor structure, High Stiffness, lower for tensile, upper for compressionupper for tensile, lower for compression, double space. The beam is step less lifting.
2 Adopting ball screw drive, realize no clearance transmission,make sure the precision control
of the test force and deformation speed.
3 The shiel plate with limit mechanism used to control the beam moving range, in order to avoid sensor damaged due to the moving distance is too large.
4 The table, moving beams is made of high quality precision machining steel plate not
only reduce the vibration generated by specimen fracture, but also improve the stiffness.
5 Three columns of mandatory orientation, make the main unit rigidity much improved, to
further ensure the repeatability of measurement.
6 Adopt bolt type grip installation, make the grip replace easier.
7 Adopt AC servo driver and AC servo motor, with stable performance,more reliable. Have over-current, over-voltage, over speed, overload protection device.

Jual UTM Untuk Karet WDW-2 & WDW-2E


Application:
It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.

Standard: 
ASTM, ISO, DIN, GB and other international standards.

Spesikasi
Model
WDW-2
WDW-2E


Max. Load
2 KN


Structure
Four-column Floor Model (Upper Is Compression and Lower Is Tensile OR Upper Is Tensile and Lower Is Compression)




Control Method
Computer Automatic Control


Load Accuracy
1 Class
0.5 Class


Load Range
2%~100% FS(0.04KN~2KN)
0.2%~100% FS (0.004KN~2KN)


Motor
Taiwan TECO AC Servo Motor
Panasonic Motor, Made In Japan


Sensor
High Precision Load Sensor,Made In China
Import Sensor, Made In USA


Resolution
1/300000


Measuring Range of Deformation
2%~100%


Accuracy Indication of Deformation
≤±1%


Disp. Indicating Relative Error
≤±1%


Displacement Resolution
0.04um


Adjusting Range of Control Rate of Load
0.005~5%FS/S


Control Precision of Control Rate of Load
When rate < 0.05% FS/s, the precision is within ± 2% of setting value; When rate ≥ 0.005%FS/s, the precision is within ± 1% of setting value.




Adjustment Scope of Deformation Rate
0.005~5%FN/S


Accuracy of Deformation Rate
Test Speed<0.05%FN/s, within the ±2% of the preset value, Test Speed≥0.05%FN/s, within the ±0.5% of the preset value.




Adjusting Range of Displacement Rate
0.05~1000mm/min (Can be customized)


Control Precision of Displacement Rate
When rate < 0.5mm/min, within ± 1% of setting value; When rate ≥ 0.5mm/min, within ± 0.5% of setting value.




Scope of The Consistent Load Deformation and Displacement Control
0.5%~100%FS


Accuracy of The Consistent Load Deformation and Displacement Control
Preset value≥10%FN, within the ±0.1% of preset value; Preset value<10%FN, within the ±1% of preset value.




Tensile Space
800mm (Can be customized)


Compression Space
800mm (Can be customized)


Effective Spacing
400mm (Can be customized)


Load Cell Configuration
One PC (Max Load). More load cells can be added according to customer requirement.




Extend Configuration
Large deformation extensometer, High or low temperature test chamber, High temperature oven.




Power Supply
AC 220V±10%, 50Hz (Can be customized)


Grips
Wedge Type, Plate Type and Other Grips as Customers’ Demand


Dimension
740*420*1720mm


Weight
160 KG